SM-16GT
| technical data | ||
| Upper rotary max torque | kNm | 11 |
| Lower rotary max torque | kNm | 32 |
| Rated diesel engine power | kW | 176 at 1900 rpm |
| Engine make and model | kg | DEUTZ TCD 2013 L06 - 2V |
| Standard cradle stroke | mm | 4000 |
| Max feed force | kN | 130 |
| Max hoist | kW | 195 |
| Clamping range | mm | 60-320 |
| Track shoe width | mm | 400 |
| Weight | t | 16 |
SM-16GT responds to the demand of geothermal systems drilling between 100 and 250 metres.
The equipment's characteristics mean it can satisfy 70% of demand from the low-enthalpy geothermal sector. The compact drilling rig has a rubber tracked, 2300 mm-wide carriage and very low ground bearing pressure (0.65 Kg/cm2), thereby minimising damage to private property (gardens and courtyards) where domestic geothermal energy is used.
The drilling rig is equipped with fixed kinematic mechanism with a wide section mast, half-cylinder pull/push and a 19.5 ton pull capacity and 9.8 ton push power.
The rig is designed for rapid manoeuvring (0.2รท0,6 m/sec) and has a 200 kW, 2400 rpm diesel engine adapted to power the double rotary (upper 1100 daNm - bottom 3200 daNm), triple clamp and magnetic loading system to simultaneously manoeuvre rods/casings.
To keep weight to a minimum the drilling rig is not fitted with heavy and bulky casing/rod storage and is instead accompanied by an autonomous motorised rack system during operation.
The equipment's characteristics mean it can satisfy 70% of demand from the low-enthalpy geothermal sector. The compact drilling rig has a rubber tracked, 2300 mm-wide carriage and very low ground bearing pressure (0.65 Kg/cm2), thereby minimising damage to private property (gardens and courtyards) where domestic geothermal energy is used.
The drilling rig is equipped with fixed kinematic mechanism with a wide section mast, half-cylinder pull/push and a 19.5 ton pull capacity and 9.8 ton push power.
The rig is designed for rapid manoeuvring (0.2รท0,6 m/sec) and has a 200 kW, 2400 rpm diesel engine adapted to power the double rotary (upper 1100 daNm - bottom 3200 daNm), triple clamp and magnetic loading system to simultaneously manoeuvre rods/casings.
To keep weight to a minimum the drilling rig is not fitted with heavy and bulky casing/rod storage and is instead accompanied by an autonomous motorised rack system during operation.
Websolute